AirWard, Kit - Bolt/Washer/Nut - Piper MSB1345A - Wing Attach Fitting

AirWard, Kit - Bolt/Washer/Nut - Piper MSB1345A - Wing Attach Fitting

  • $59.00
  • Save $20


WHEN ORDERING - PLEASE NOTE YOUR AIRCRAFT TYPE, SERIAL NUMBER OR "N" NUMBER IN THE "NOTES" SECTION.

WHEN ORDERING - On ALL PA28/32 there are two different combinations of Bolts/Nuts.  Prior to the late 1980's to early 1990's the Bolts were AN176-13A and the Nuts were MS21046-6.  Piper decided to change this combination to NAS6606-13 Bolts and MS21042-6 Nuts.  Both Sets are Close Tolerance Bolts with the same diameter, with the "New" Bolts a little bit shorter.  You can tell which Bolts you have by looking at the Main Spar from above: the "Old" Bolt Heads are Flush; the "New" Bolts have a Concave Head.  From under the Wing/Fuselege - The "Old" Nuts require a 9/16" Wrench/Socket; the "New" Nuts require a 7/16" Wrench/Socket. When Ordering the Kit - in the NOTES Section indicate either "OLD" or "NEW" Bolt/Nut combination.  If nothing is indicated - we will ship the "OLD" Set.

Kit consists of the following:

4 - AN176-13A (NAS6606-13) Bolt, Close Tolerance - 3/8-24;

4 - 96352-003 (494-284) Washer, Flat - 3/8" ID - Rounded Flat;

4 - AN960-616 Washer, Flat - 3/8" ID;

4 - MS21045-6 (MS21042-6) Nut, All Metal - 3/8-24;

1 - 6430-357 Brush, Pistol Barrel - Bronze - .357 OD;

1 - Copy of Piper MSB1345A Main Spar Attach Fitting Inspection;

1 - Copy of Piper MSB1366 Main Spar Attach Fitting Hardware Inspection;

1 - Copy of Airworthiness Directive 2020-26-16;

1 - Copy of AirWard's "Helpful Hints".

Applies to the following Pipers with over 5000 Hours:

PA28-151/161/181/235;

PA28R-180/200/201/201R/201RT;

PA32-260/300/300R/300RT (Early Models);

Also used on PA28-140/150/160/180/235/PA32-260/300.

Note: AirWard also has a Kit for a "Peace of Mind" option - Replacement of ALL (36) Bolts/Washers/Nuts on Wing Attach Fittings (Both Sides) - see AW-KITPA28/32SPARATTACH or (18) Bolts/Washers/Nuts for Single Wing Only.