AirWard Piper MSB1006 Fuel Tank Inspection Kit (PA28R180/200 ) (Arrow)

  • $419.00
  • Save $136


VERY IMPORTANT: When Checking Out with your Kit, be sure and note your Aircraft Model, Serial Number and/or "N" Number - in the "NOTES" Section.  This assures you will receive the proper Kit.

  1. Inspect for corrosion and treat the spar areas behind the fuel tanks
     
  2. Replace fuel/vent lines that are now very old and brittle.

Most Pipers have never had their tanks off. Unchecked spar corrosion and deteriorating fuel lines present significant safety and longevity problems. Let alone loss of investment.

For those of you that do not have access to a Pneumatic Screw Removal Tool Kit. We have one available from Aircraft Tool Supply. This Kit is very helpful for those stubborn tank screws. The last thing you want to do is strip the head on one of these screws as this will make removing a fuel tank a miserable job. You need access to a Pneumatic Rivet Gun and compressed air to use this Kit.

Piper Mandatory SB1006 should be complied with every 7 years.

NO FAA Form 8130-3 will be included.

If any HOSES require FAA Form 8130-3 - call/e-mail for quote.

All MSB1006 Kits are shipped Ground (UPS/FedEx) because of Ardrox (Dinitrol) AV-8 Corrosion Preventative being flammable, HAZMAT.

FREE SHIPPING is available only in the Continental U.S.

You may need some of the following parts or tools:

2 - CCA-1550 Fuel Drain Valve (Bayonet Style);

2 - F391-187 Fuel Drain Valve (Flush Style);

Note: If you find your Fuel Cap is loose after tightening - you may need the 1/8" Thick Gasket (RG-325). 

2 - 462-056 Fuel Cap Gasket - 1/16" Thick or

2 - RG-325 Fuel Cap Gasket - 1/8" Thick;

36625-002 Fuel Vent Drain - Left Wing;

36625-003 Fuel Vent Drain - Right Wing;

AT540A-Kit Screw/Bolt Removal Kit.