AirWard ONEX/SONEX - Fuel Shutoff Valve Control Kit

AirWard ONEX/SONEX - Fuel Shutoff Valve Control Kit

  • $79.00
  • Save $10


AirWard has developed a ONEX Push/Pull Control to operate the Fuel Shutoff Valve while seated and strapped into your seat. Using the standard setup you are unable to reach the Fuel Shutoff Valve by reaching under the Instrument Panel if the need arises. This Kit is for the "Original" Fuel Tank.

This Kit to be used with Small Fuel Shutoff Valve that screws into Fuel Screen and has a small handle.

The Kit consists of the following items:

1 (one) Surround for the Fuel Tank Sump;

1 (one) 10/32 Steel Rod 10" Long - Threaded @ both ends;

1 (one) Knob

1 (one) Rod End

1 (one) Bushing, 3/8" Aluminum 1 3/8" Long - Drilled to 10/32;

1 (one) Bolt, AN3-20A;

1 (one) Washer, Flat - AN960-3;

5 (five) Washer, Flat - AN960-06;

1 (one) Screw, Machine - AN503-6-4 - #6 x 1/4" Fillister Head - Drilled Head;

6 (six) Wire, Safety - .022 - inches

1 (one) Nut, Elastic Stop - MS21044N3 - 10/32;

2 (two) Nut, Jam - AN315-3 - 10/32;

1 (one) Sleeve, Nylon - 3" - 10/32 ID;

1 (one) Triangle, Aluminum;

4 (four) Rivet, Solid - #3 - 1/4";

1 (one) Rivet, Solid - #4 - 3/8";

1 (one) Rivet, Solid - #5 - 3/8";

1 (one) Label - "FUEL SHUTOFF VALVE";

1 (one) Label - "PUSH ON PULL OFF";

1    Installation Instructions.