AirWard Van's RV-10 - Tunnel Access Kit

AirWard Van's RV-10 - Tunnel Access Kit

  • $69.00
  • Save $10


AirWard has developed a vertical Access Panel Kit for the forward tunnel area after the tunnel is covered by either the stock Van's cover or a fiberglass cover.  The ease of access is simplified by use of countersunk #8 screws. Access to the tunnel is required periodically when inspecting the fuel system, cleaning the fuel filter and general inspection of the brake lines, heater hose and cable/wire routing.  The access panels can be installed on either the left, right or both sides of the tunnel. The tunnel cutout is 11" X 7",  the final opening is 10" X 5 3/4".  Both the aluminum cover and reinforcement are .040" thick.

The Kit consists of the following:

1 - Tunnel Access Reinforcing Plate;

1 - Tunnel Access Cover Plate;

12 - K1000-08 Anchor Nuts;

12 - MS24693-S4 Screw, Machine - Countersunk;

11 - LP4-3 Pull Rivets;

50 - AN426AD3-3-5 Rivet, Solid - Countersunk;

1 - Copy of Installation Instructions and Photos.